29 Christmas Tree Topper Ideas That Make Your Tree Look Designer-Styled
The top of the tree is the last spot most people decorate and the first thing guests notice from across the room. A well-chosen Christmas tree topper sets the tone for everything beneath it: a hand-bent brass star reads traditional, a pampas spray reads relaxed and modern, and an oversized velvet bow looks polished with almost no other ornaments. These 29 Christmas tree topper ideas cover very different looks, from five-minute DIY projects to heirloom-quality glass, so you can match one to your tree’s height, your lights, and your budget. Each entry explains what the topper looks like, how to keep it secure, and what to pair it with so the finished tree looks planned rather than piled on.
1. Slim Brass Wire Star Above Warm White Lights

An open-line star made from thin brass or gold-finished wire is one of the easiest ways to get a traditional tree to look edited. Because the shape is mostly air, the lights behind it show through, and the star seems to glow rather than sit on the tree like a solid block. It suits full Fraser fir or Douglas fir-style trees decorated in red, cream, and gold, and it works just as well on a slim artificial tree in an apartment.
Secure it by sliding the base over the center leader and wrapping floral wire around the branch tips beneath it, so the star stays upright instead of leaning toward the room.
Quick Tip: Pick a star about as wide as the top two tiers of branches. Anything much larger will look top-heavy; anything smaller disappears.
2. Oversized Velvet Bow With Long Streamers

A single large bow in deep green, burgundy, or navy velvet gives the tree a finished top without a traditional topper at all. The key is scale: the loops should be wide enough to read from the sofa, and the tails should be long enough to drape down the front and sides of the tree, tying the top into the garland or ribbon below.
Wired velvet ribbon holds its shape far better than unwired, which tends to droop by the second week of December. Tie the bow to a sturdy branch tip with floral wire, then tuck the tails into the tree rather than letting them hang loose.
Do: Repeat the bow’s color in a few ornaments or in ribbon woven through the branches.
Don’t: Use a bow narrower than the top tier; it will look like a gift-wrap leftover rather than a topper.
3. Plaid Ribbon Fan for a Farmhouse Tree

Flannel-style plaid ribbon in red, black, and cream gives a farmhouse or cabin tree a casual, handmade finish. The fan shape, with loops radiating upward like a pinwheel, keeps the look light and avoids the stiff formality of a single bow.
It’s also one of the more forgiving DIY projects, because small imperfections read as charm.
- Cut six to eight lengths of wired plaid ribbon, each about 18 inches.
- Fold each into a loop and pinch the ends together.
- Stack the loops fan-style around a central point and bind them with floral wire.
- Add a small burlap or twine bow at the center, then wire the fan to the top branches.
4. Woven Rattan Star for a Natural Tree

Rattan and wicker stars bring a warm, textured finish to trees decorated with wood, wool, and dried materials. The slightly irregular weave catches light differently than metal or glass, which keeps a neutral tree from feeling flat.
- Best with: Cream, tan, and sage ornaments, linen ribbon, and warm white lights.
- Size to look for: Wide enough to read from across the room, but light enough that it doesn’t bend the top branch.
- Care: Keep it away from damp spots or heat vents so the fibers don’t warp.
- Easy upgrade: Tuck a few dried wheat stems behind the star for a softer outline.
Because natural fibers are lightweight, a short length of floral wire is usually enough to anchor it.
5. Pampas Grass Plume With Dried Florals

A feathery cluster of pampas grass, bunny tails, and dried florals gives a tree a relaxed, boho look. Instead of a defined shape, the topper creates a soft cloud of texture, which pairs naturally with neutral ornaments in cream, rust, and dusty pink.
Build it from three or four stems, angling them outward from the center leader so the plumes fan in slightly different directions. Keep the height roughly equal to the top tier’s width so the tree doesn’t appear to sprout a haystack.
Editor’s Note: Real pampas can shed, so a light mist of unscented hairspray on the plumes before placing them cuts down on fluff on the floor. Keep dried stems away from hot bulbs and use LED lights.
6. Evergreen and Red Berry Spray

Sometimes the best topper is simply more tree. A spray of pine, cedar, and red berry picks, wired into a fountain at the top, extends the tree’s natural shape and makes the whole thing look fuller. It’s an inexpensive fix for artificial trees whose top tier looks sparse or thin.
Use stems in two or three shades of green plus a few berry picks, then wire them together at the base and push the bundle into the leader. Let a few stems arch outward so the silhouette stays organic.
This approach works well when the rest of the tree already has strong ornaments and you want the topper to blend in.
7. Mercury Glass Finial Spire

A tall, tapered glass finial in a silvered or antiqued mercury finish gives the tree top a formal, vintage feel. The reflective surface throws small points of light back into the room, so it looks lit even between strands.
Best For: Traditional and vintage-inspired trees with glass ornaments
Investment: Moderate to premium, depending on whether the glass is mouth-blown
Visual Effect: A slender vertical accent that draws the eye upward
Because glass is heavy and breakable, choose a spire with a wide, stable base that rests securely on the leader, and keep it away from pets and swinging tree-skirt activity. A few matching mercury balls lower on the tree complete the look.
8. Ornament Cluster Starburst

A bundle of ornaments wired together in a starburst makes a topper out of decorations you may already own. Choose a tight color palette, such as blush, gold, and cream, and vary the finishes: matte, glitter, and shiny. Different sizes create depth.
- Gather 7 to 9 shatterproof ornaments of varying sizes.
- Remove the caps, then thread floral wire through the loops.
- Twist the wires into a central stem and fan the ornaments outward.
- Insert the stem into the leader and secure it with extra wire.
Shatterproof ornaments keep the topper light, so the tree top won’t bend.
9. Linen-Winged Angel

An angel topper in linen or muslin has a soft, homespun look, which suits trees decorated with natural materials and vintage ornaments. Choose a figure whose wings are proportional to its body; oversized wings can catch air currents and tilt the whole piece.
Common Mistake: Choosing an angel with a heavy porcelain face for a lightweight tree.
Better Approach: Match the weight to the tree. Fabric and wood angels sit securely on thin tips, while porcelain ones need a sturdy leader and a base that fits.
If the angel’s skirt covers the branches underneath, trim a few branch tips for a cleaner fit.
10. Folded Paper Star Lantern

A paper star lantern, the kind with multiple points and a light inside, creates a warm, diffused glow instead of the sharp sparkle of metal. White or kraft paper stars suit simple, Scandinavian-inspired trees, while colored versions pair well with traditional ornaments.
Because the lantern contains its own light source, you can leave it battery-powered or choose one that plugs into the tree’s power strand. The shape is large and light, so it needs little more than a secure placement on the leader. Check that the light is LED and cool to the touch, since paper and heat don’t mix.
Quick Tip: If the star spins, wrap a small piece of floral wire at the base to hold it in the direction you want.
11. Pale Wood Geometric Star

A flat, geometric star cut from birch or similar light wood gives a minimalist tree a clean, modern look. The shape is simple, the material is warm, and the topper doesn’t compete with ornaments below.
| Wood Finish | Visual Effect | Best Fit |
|---|---|---|
| Natural birch | Light, soft grain | Scandinavian or minimalist trees |
| Walnut stain | Deeper contrast | Trees with cream or brass ornaments |
| Whitewashed | Subtle texture | White or silver palettes |
A flat star can twist from the front view, so wire it to the top branch with the face toward the main seating area, and check it from the doorway before you finish.
12. Copper Wire Starburst With Built-In Lights

A starburst of copper wire strung with tiny LED lights gives the tree top a modern, glowing finish. The warm metal tone suits trees with amber lights, wood ornaments, and cream or rust ribbon.
- Look: Radiating lines instead of a solid star shape
- Power: Battery-operated versions avoid extra cords, but check the battery life for the full season
- Placement: Angle it slightly forward so it faces the room
- Pairing: Looks best when the tree’s other lights are the same warm color
Leave the wires slightly uneven for a handmade look; perfectly symmetrical shapes can feel factory-made.
13. Ostrich Feather Plume

A plume of ostrich or faux feathers in ivory, champagne, or blush gives the tree a soft, glamorous finish. The movement of the feathers adds life to the tree top, especially in rooms with gentle air circulation.
Build a spray from 10 to 15 feathers in two lengths, then wire them together into a fan. The longest feathers should arch outward from the center, with shorter ones filling in beneath.
Editor’s Note: Feather toppers collect dust and can look limp in humid rooms, so a faux version is the more practical choice for a home with pets or heavy airflow.
14. Acrylic Crystal Starburst

An acrylic or crystal starburst catches and scatters the surrounding lights, so it sparkles from nearly every angle. It works best on trees with silver, white, and icy blue palettes, where the clear material blends into the overall look.
Best For: Formal living rooms and trees with white or cool-toned lights
Investment: Moderate to premium
Visual Effect: Scattered, prism-like sparkle
Place the starburst so a light strand sits just behind or beside it; without a nearby light source, the crystal can look flat. Dust it lightly with a soft cloth to keep it clear.
15. Hand-Blown Glass Star With a Frosted Finish

A glass star with a frosted or lightly iridescent finish is the kind of topper that gets passed down. The thickness and slight irregularity of hand-blown glass give it a depth that molded plastic can’t match, and in daylight it glows softly instead of glittering.
Best For: Heirloom-style trees and collectors who rotate the same ornaments every year
Investment: Premium
Visual Effect: A soft, luminous star with a gentle sheen
Since glass has weight, check that the tree’s top section can support it; a slim artificial tree with a flexible leader may need a small dowel or extra wire to stay upright. Store it in a padded box with tissue in a cool, dry place after the season.
16. Faux Poinsettia Bloom Crown

Poinsettias are everywhere in December, so a single oversized faux bloom at the top of the tree feels familiar and a little unexpected at the same time. Red is the classic choice; white, blush, or cream versions suit softer palettes.
- Build: One large bloom or a cluster of three, wired onto a short stem
- Greenery: Add a few pine or ivy sprigs behind the bloom to blend it into the tree
- Pairing: Repeat the color in a few smaller poinsettia picks lower on the tree
- Watch for: Cheap petals with a flat, plasticky sheen; fabric or velvet-feel petals look more natural
The topper pairs well with plaid ribbon and gold accents in a classic color scheme.
17. Magnolia Leaf Fan in Deep Green and Bronze

Magnolia leaves have a glossy green face and a rust-brown underside, which gives a leaf fan a rich, two-tone look. Arranged in an upward fan, they read as classic Southern and traditional, and they hold up well against red velvet or gold ornaments.
The leaves are sturdy enough to keep their shape, so a fan of 9 to 12 stems wired at the base is usually enough. Mix a few bronze leaves, bottom side out, with the green for added depth. Real magnolia leaves dry and curl after a few weeks, so many people choose faux or preserved leaves for a topper that must last through January.
Quick Tip: Wire a few dried cotton bolls or small pinecones into the center to fill the gaps between stems.
18. Cotton Stem and Eucalyptus Spray

Cotton stems and silvery eucalyptus make a soft, wintry topper that suits cabin and neutral trees. The pale green and white palette pairs well with wood and wool ornaments, and the loose arrangement gives the tree top a natural, gathered-from-the-field look.
- Choose three eucalyptus stems of different lengths and four or five cotton stems.
- Trim the stems so the longest will rise about a foot above the tree’s tip.
- Bind them together with floral tape, angling the cotton stems outward.
- Insert the bundle into the leader and anchor it with wire.
Editor’s Note: Real eucalyptus dries well, but the scent fades. Dried or preserved stems last longer and don’t need water.
19. Crochet Snowflake Topper

A stiffened crochet snowflake is a good project for anyone who already has yarn and a hook. White or cream cotton thread gives the most delicate look, and the lace pattern casts small shadows that look especially good against a dark green tree.
Most crocheted snowflakes need fabric stiffener or a starch solution to hold their shape; follow the product’s instructions and let the piece dry flat. A large snowflake, around eight to ten inches across, reads well as a topper. Attach it with a small loop of wire to a branch tip rather than the center leader so it faces forward.
Quick Tip: If you don’t crochet, look for handmade lace snowflakes or ones cut from heavy cardstock.
20. Bouclé-Covered Star

Bouclé, the looped, nubby fabric that’s been popular in furniture, translates neatly into a soft padded star. In ivory or oatmeal, it suits trees dressed in neutral textiles, pampas, and wood.
Do: Keep the rest of the tree’s palette neutral so the texture stands out.
Don’t: Pair it with very shiny metallic ornaments; the contrast of soft and slick can look disjointed.
Because the star is fabric-covered, it’s light and easy to attach with a wire loop. It also tends to be inexpensive, which makes it a practical choice for trees in rental apartments where you want a current look without a large investment.
21. Dried Orange Slice Sunburst

Dried orange slices catch the light like stained glass, and a ring of them around a center creates a sunburst that suits rustic, cabin, and Scandinavian-style trees. The color pairs well with cinnamon sticks, cranberries, and evergreen.
- Slice oranges about a quarter-inch thick and pat them dry.
- Dry on a baking sheet in a low oven, around 200°F, for several hours, flipping occasionally, until dry to the touch.
- Let cool completely, then glue the slices around a cardboard or wooden disk with hot glue.
- Add a few cinnamon sticks or star anise between slices and wire to the tree.
Editor’s Note: Dried fruit is fragile and attracts moisture, so keep it away from damp rooms and plan to make a fresh one each year.
22. Knit Gnome Hat Topper

A tall, pointed gnome hat in felt or knit wool, often with a fluffy beard peeking out, brings humor to the tree and appeals to families with kids. Red and gray are traditional; mustard, sage, and cream versions suit calmer palettes.
The pointed shape sits comfortably on the tip, and the soft material is lightweight, so there’s little risk of bending a thin leader.
Common Mistake: Choosing a hat that’s too long and floppy, so it droops to one side.
Better Approach: Look for a hat with a lightly stiffened cone or add a short wire or dowel inside to keep the point upright.
A few mini gnomes among the ornaments tie the look together.
23. Pearl and Satin Coquette Bow

The soft, ribbon-heavy “coquette” look has moved from fashion to holiday decor, and a satin bow edged with pearl strands is its tree-top version. Blush, ivory, and pale pink satin photograph well with pearl garland, glass balls, and white lights.
- Base: A wide wired satin bow with two long tails
- Detail: Loop a pearl strand across the knot and let a few strands trail down
- Palette: Blush, ivory, and soft gold; skip bold reds to keep the mood gentle
- Weight: Light enough for a thin tip, so it suits small and slim trees
Repeat the bow on a few lower branches or on the tree skirt so the topper feels like part of a set.
24. Mini Boxwood Wreath Crown

A small wreath, around eight to ten inches, tied at the top of the tree makes a tidy, formal crown. Boxwood in a dense, rounded form looks like a miniature version of the door wreath and ties the tree to the rest of the home’s holiday decor.
Wire the wreath to the top branches at an angle, so it faces forward like a halo rather than lying flat. Tuck a few small ornaments or a ribbon bow into the front for a finished look. The round shape also contrasts nicely with the vertical lines of the tree and any tall candlesticks nearby.
Quick Tip: Choose a wreath with sturdy wire stems so it holds its angle without extra supports.
25. Brass Lantern With a Flameless Candle

A small brass or black metal lantern holding a flameless candle gives the tree top a warm, cozy glow and a hint of old-world charm. It looks best on a tall tree with room for the lantern to sit on a sturdy leader, and it pairs well with evergreen sprigs tucked around its base.
Choose a lightweight lantern, about six to eight inches high, with a wide base. Anchor it with wire through the handle or base, and tuck a few greenery sprigs around the bottom so it appears nestled in the branches.
Editor’s Note: Use a flameless LED candle only. A real flame near a tree is a fire hazard, and the lantern should never hold a live candle.
26. Birch Branch Antlers

A pair of antlers made from peeled birch branches, bound at the base and splayed outward, gives a tree a woodland feel. The pale bark and angular lines work well on trees with simple wooden ornaments, wool, and white lights.
Choose branches of similar thickness and bind them with twine or floral wire at the base. Then secure the base to the leader. Faux birch looks consistent and avoids any shedding of bark; real branches add authenticity but should be dry and free from insects before bringing them indoors.
A few felted woodland animals among the ornaments reinforce the theme without overwhelming it.
27. Snowy Pinecone and Cedar Cluster

A bundle of frosted pinecones and cedar sprigs creates a compact, wintry topper that looks like it was gathered outdoors. Pinecones in different sizes add visual interest, and a light dusting of white paint or faux snow gives them a frosted edge.
Best For: Rustic, mountain, and traditional trees
Investment: Accessible, especially if you gather pinecones yourself
Visual Effect: A dense, textured cluster that sits snugly on the tip
Bake gathered pinecones on a foil-lined sheet at a low temperature to dry them and remove any pests before use. Wire three to five cones together with cedar sprigs and secure the bundle to the leader.
28. Oversized Mirror Ball Topper

A large mirrored ball, similar to a disco ball, adds playful sparkle that suits modern and party-style trees. It scatters points of light around the room as the tree lights hit its facets, so it looks lively even when the room is lit softly.
Common Mistake: Choosing a real glass mirror ball that is heavy for a thin tree tip.
Better Approach: Look for a lightweight acrylic or foam version, and secure it with a wire loop and a firm base. Check that it stays level before leaving it.
Silver, gold, and pink balls all work; match the finish to the metal tones in the rest of the tree.
29. Mini Bottlebrush Tree Topper

A tiny bottlebrush tree, the vintage-style kind made of bristles on a wire core, placed at the very top of the full-size tree gives you a tree within a tree. In flocked white, soft green, or pale pink, it adds a nostalgic touch that suits mid-century and vintage-themed trees.
The small tree is lightweight and has a compact base, so a bit of wire around the leader is usually enough to keep it upright. Choose a mini tree about four to six inches tall for a standard-height tree, and mix in a few matching bottlebrush trees lower on the branches or on the mantel to tie the look together.
Quick Tip: Stand the mini tree on a small wooden or ceramic base to give it extra stability.
How to Choose and Secure the Right Topper
Before you commit to a look, check the top of your tree. The thickness of the leader and the sturdiness of the top branches decide which toppers will stay upright and which will lean.
| Tree Type | Topper Weight to Look For | Good Starting Points |
|---|---|---|
| Slim artificial tree | Very light | Bows, bouclé star, paper lantern, feather plume |
| Full fir or sturdy artificial tree | Light to moderate | Brass star, glass finial, ornament starburst, wreath |
| Small or tabletop tree | Very light and small | Bottlebrush tree, mini bow, crochet snowflake |
Once you’ve chosen, work in this order:
- Straighten the top branches so the topper has a stable base.
- Slide the topper over the leader or insert its stem.
- Wire it to the branch tips just beneath, then step back and check it from the room’s main seating area.
- Repeat one color or material from the topper in a few lower ornaments so the top feels connected to the rest of the tree.
Start with the topper that fits your tree’s strength, then let your color palette decide the details.
